Disposable latex gloves are a kind of gloves, which are different from ordinary gloves and are made of latex. It can be used in household, industrial, medical, beauty and other industries. It is an essential hand protection product. Disposable latex gloves are made of natural latex and other fine additives. The product has a special surface treatment and is comfortable to wear. It is widely used in industrial and agricultural production, medical treatment and daily life. The rubber is sliced by a rubber mixer and then sent to a sol can to mix the sol with gasoline. The sol is emulsified and prepared, and then pumped into the latex intermediate tank. The rubber solution dissolved in gasoline is sent from the top of the distillation tower and heated by steam for distillation. The light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil-air cooler. The mixture enters the oil-water separator, and the oil and water are separated. The upper layer of gasoline is recovered, the lower layer of water is pumped to the cooling tower for cooling, and then the gas gasoline in the distillation tower is cooled; the latex from the distillation tower is sent to the latex mixing drum, which is stirred and modulated according to its own pressure, and then separated into glove material latex by a centrifuge , And then to adjust and filter for later use.
The latex gloves are cleaned with acid, alkali and water. The cleaned model is immersed in hot water for heating, and then immersed in a coagulant for drying and dipping. After dipping, it is sent to an oven for preliminary drying, and the fiber is added into the inner sleeve, rinsed with hot water, and then sent to the oven to vulcanize, dry and shape. After demoulding, the gloves are inflated, shaped at low temperature, dried at medium temperature, washed with water, dehydrated and dried, packaged and sent to the finished product warehouse.
A pair of good latex gloves, the surface should be clean and beautiful, yellow, with good curling, high tension and air tightness.
It is a bit difficult to test latex gloves by our hands, and we need professional machines to test. All we can do is look at the color. White, white latex gloves are full of additives. The whiter the color, the more additives, and the more additives, the lower the tension. However, there are many gloves with yellow paint that can change the color of the gloves, so this is not entirely reliable. Finally, we must look at the degree of folds of the gloves. It's like a pair of latex gloves. Open from the package, gloves with high glue content will not wrinkle, the lower the glue content, the more wrinkles. If a pair of gloves is wrinkled and white, the amount of glue inside is very low. The reason why we all use latex is because latex is flexible and flexible. There is nothing better than latex.